Cannabis Quality Control Procedures – Visit This Site Now To Choose Further Information..

Cancer

As the Cannabis market expands for both medical and recreational use, so does the requirement for standardized quality control within the industry. When it comes to Cannabis quality control there are lots of facts to consider, from moisture content to pesticide use.

Moisture Content – Cannabis flower moisture content needs to be tested and controlled to: minimize the chance of mold formation; control microbiological levels; ensure proper drying, curing and storage conditions; and support product shelf-life. Some manufacturing processes for marijuana quality control procedures also need a certain water content inside the starting material.

Terpenoids and Cannabinoids Analysis

The amount of terpenoids and cannabinoids in the starting material determines the most suitable industrial processing method and which final cannabis product will be manufactured. This analysis is usually carried out using LC-MS (Liquid Chromatography Mass Spectrometry) or GC (Gas Chromatography). LC-MS and GC need a flow of inert gas including hydrogen or nitrogen, both of which can be simply supplied via a gas generator. Uncover more concerning the Peak Scientific range of gas generators for GC & LC-MS here.

Pesticides and Herbicides – As with other agricultural crops and merchandise intended for human consumption, Cannabis plants needs to be tested for herbicides and pesticides. Detecting pesticides and herbicides can be challenging because of the complexity of cannabis material. GCMS (Gas Chromatography Mass Spectrometry) is usually used for this function.

Microbiological Screening – Medical Cannabis is frequently utilized for HIV and cancer patients in which the patient’s defense mechanisms has been compromised. Therefore, high microbial levels or pathogenic micro-organisms might be deadly. It is crucial then that several Mycotoxins and fungus types ought to be detected as an element of cannabis quality control and release specifications.

Residual Solvents – Where solvents happen to be used as an element of Cannabis product processing, solvent residuals inside the final products needs to be tested to ensure they meet the accepted criteria. The FDA has published zvqtob criteria for residual solvents in APIs for pharmaceutical use.

Chemical Toxins – Like many other plants, Cannabis draws metals from the earth. It is therfore essential to test for Mercury, Lead, Arsen and Cadmium.

Cannabinoid Concentration – Concentration ranges for cannabinoids including THC,THCa, CBD, CBDa, CBN, CBC, CBG should match the ranges specified on the product label, based on product usage purpose, patient’s medical problem, age etc. Cannabinoid concentrations may be tested using LC-MS (Liquid Chromatography Mass Spectrometry) and HPLC (High Performance Liquid Chromatography) . There are a variety of Peak Scientific nitrogen gas generators designed particularly for LC-MS, available here.

Terpene Concentration – Terpenes increase cannabinoids’ therapeutic effects and are acknowledged to have their own own health advantages, in addition they contribute to Cannabis taste and aroma. They could be detected using GC.

Taking the suggestions above into consideration, it is actually clear that you will find a necessity for standarized procedures for all the Cannabis analysis and testing process in order to guarantee safe use. The safest method to supply cannabis testing laboratories with gas for his or her LC-MS and GC is via gas generators, which usually do not present the health and safety risks related to gas cylinders.

Previous
Mexican Brides – See The Team Today To Look For Extra Advice..
Next
5 Essential Tips for an Effective SEO Strategy for Your Organisation

Leave a comment

Your email address will not be published. Required fields are marked *